add share buttonsSoftshare button powered by web designing, website development company in India

Handrail brackets defend your handrails to the wall. If the bracket is not installed properly, the bracket will retract, leaving an ugly hole in the wall. You can also browse this site to buy the best handrail brackets.

Image Source: Google

To avoid this, you need to make sure that you have placed the brackets correctly. To help you, here is a guide on how to properly install the brackets.

How to install the handrail brackets 

You should start by marking a place on the wall. For best results, ensure that it is 36 inches from the leading edge of the lower step and 6 inches from the end of the railing. To prevent marks from appearing on your walls, you need to use a pencil.

Then you need to attach the brackets and mark the location of the screw holes with a pencil. Then you need to drill a pilot hole with a 1/8 inch drill bit and insert a screw through the hole in the bracket.

You need to install the handrails and mark the screw holes in each bracket, then remove the handles and drill pilot holes. Notice that the screw runs at an angle. Usually difficult to set up properly; Therefore it is important to make the initial hole first.

After drilling the holes in the starter, you'll need to install screws through the bracket and attach the handrail to the bottom and bottom brackets.

Guide On How To Install Handrail Brackets